The Filters Fast® FF10BBPS-30 Replacement for Pentek R30-BB is a hard-working, heavy duty filter designed for whole house use. Engineered with a superb 30-micron rating, the FF10BBPS-30 reduces dirt, sand, scale, rust, and other particles that are trapped before moving throughout your home's plumbing. The 30-micron filtration level also helps protect fixtures and appliances that use running water from sediment and scale particle build up.
Specifications:
- Brand: Filters Fast®
- Part Number: FF10BBPS-30
- Replaces Part Number: R30-BB
- Micron Rating: 30
- Flow Rate: 10 GPM
- Filter Media: Pleated Polyester
- Filter Life: 6 months (depending on water quality)
- Dimensions: 9 3/4" x 4 1/2"
- Temperature range: 40 to 125 ° F
- Reduces dirt, sand, rust, and scale particles
How do you install the Filters Fast® Replacement for Pentek R30-BB?
- Turn off water supply. Press red pressure-relief button (if present).
- Unscrew housing. Remove large o-ring, wipe clean and set aside.
- Discard used filter cartridge. Wash housing with dish soap and warm water using a nonabrasive sponge or cloth. Rinse thoroughly.
- Fill 1/3 with water. Add about 1 tablespoon of bleach and scrub to disinfect. Rinse thoroughly.
- Lubricate o-ring with clean silicone grease. Change o-ring if any damage cuts or degradation are present. Insert o-ring in groove.
- NOTE: This step is important to ensure a proper housing seal. Make certain the o-ring is seated level in the groove.
- Insert new filter cartridge.
- Screw housing onto the cap and hand-tighten. Do not over tighten. Make sure cap standpipe slips into cartridge.
- Turn on water supply. Press pressure-relief button (if present). Check for leaks before leaving installation.Most fit issues result from either an old cartridge o-ring that fell off when removing the old cartridge, or failing to get the standpipe lined up when hand tightening the housing.
How often should you replace the Filters Fast® Replacement for Pentek R30-BB?
- Changing your Filters Fast® Replacement for Pentek R30-BB is a very quick and easy process that should be done once every six months.
What contaminants does the Filters Fast® Replacement for Pentek R30-BB reduce?
The Filters Fast® Replacement for Pentek R30-BB reduces the following contaminants:
- Dirt
- Sand
- Rust
- Scale Particles
Compatible Parts:
The Filters Fast FF10BBPS-30 is the correct replacement for the following part numbers:
Compatible Models:
The Filters Fast FF10BBPS-30 is correct replacement for the following model numbers:
Customer Reviews
It doesn’t come with the rubber gasket rings like some other brands but it works fine.
Collected by Trustpilot.comGreat for whole home sediment filtration
Collected by Trustpilot.comPerfect fit for my whole house filter system.
Collected by Trustpilot.comProduct Availability
Please provide your e-mail address below to receive a notification when this product becomes available:
XThanks! We'll send you a notification when this product is available!